Took a few hours to sort the template and cut the plywood around the wheel arch and various other obstacles! Plus my math is pretty rubbish so I cut with some spare and whittled it down to fit!
The real joy is that now one side is done all I need do is flip it over having laid the other board underneath and draw around the cuts! then line them up again and mark the width and cut that. So all that should take an hour at best.
Then measure the remaining gap at the front and cut to size again. Clean the floor and lay the pads of ply as and where the floor is flat.
Whilst that is curing I can lay the Altro on the floor (dont tell the wife lol ) lay the wood on top and draw around it. So it can be cut and fitted after the 1st of June when the pop top roof is fitted.
No comments:
Post a Comment