Used 5 mm ply board painted white. And used 15 mm small rubber door stops to mount it to the ply wallboard. Small amount of extra damping for the electrics if nothing else!
This new unit controls the solar panel as well.
Live feed to unit via main battery direct.
Auxiliary battery live from unit to battery via the live busbar. Live / neutral cables not connected at the moment until I've got the accessories wired in.
Solar panel live is connected
Next is run the ignition live wire to SP unit.
Fit battery temperature monitor cable.
Then add the negative busbar
Run the accessories live/ neutral wires to fuse box/ neg busbar.
Then fit the live battery cables fire up and fingers crossed all should be working!
No comments:
Post a Comment