Unit needed to be cut down on right side, needed room for battery by about an inch! So as the oven is going that side and only 490mm wide I cut off the difference in length so that the oven fits correctly as it's secured at the front on all 4 sides. Saving the need for a seperate extra panel within the unit to secure oven. It will be mounted beneath the sink unit, leaving a small cupboard below. It is sat on the base to check size!
To the left a drawer and large cupboard.
The worktop needs to be chamfered at rear left to allow a overhang. This will have the LPG fittings filters and regulators below. Hopefully room enough to build a cupboard around them.
Also added the fresh water filler to the end panel.
No comments:
Post a Comment